Alpine front wing, Suzuka, 2024

Pictures: Alpine’s new front wing and more Suzuka updates

Formula 1

Posted on

| Written by

The new season started badly for Alpine. They were the slowest team at all three rounds so far, and on two occasions the A524 proved no quicker than its predecessor.

The team embarked on a significant change of design concept this year and believe they have not managed to extract the best from it yet. Part of the problem is getting the car down to the 798 kilogram minimum weight limit, which is why it has run with so little paint so far.

Since the season began Alpine has lost further senior members of its design team, including Matt Harman who was the technical director when the A524 was delivered. Team principal Bruno Famin has installed new management in the design department which is charged with addressing the A524’s shortcomings.

Alpine has introduced its first update under the new leadership at the Japanese Grand Prix this weekend. Although it describes the change as a modest step, it is aiming to both lighten the car and improve its aerodynamic balance, which promises to be a win-win if they have got it right.

Alpine front wing, Bahrain, 2024
Alpine front wing, Bahrain, 2024

The most noticeable change to the A524 is its front wing, all elements of which have been revised compared to the version used since the start of the season (above).

In particular the outer edges of the upper flaps have been trimmed back. The team the “more offloaded outboard front wing” design will give “an efficient drag saving compared to the previous wing.”

Advert | Become a RaceFans supporter and go ad-free

Alpine front wing, Suzuka, 2024
Alpine front wing, Suzuka, 2024
Alpine front brake duct, Bahrain, 2024
Alpine front brake duct, Bahrain, 2024

Like Red Bull, Alpine have also paid attention to their front brake ducts, reducing their dimensions to improve aerodynamic efficiency at a track where the brakes are not heavily used. The change has been designed to complement the new front wing shape. Some blanking was left in place when the team presented the car at Suzuka (below).

Alpine front brake duct, Suzuka, 2024
Alpine front brake duct, Suzuka, 2024

The team is also using a conventional non-biplane beam wing design. This “offloads the beam wing and top rear wing to increase load in the floor compared to the previous version,” says the team.

Advert | Become a RaceFans supporter and go ad-free

Alpine rear beam wing, Suzuka, 2024
Alpine rear beam wing, Suzuka, 2024

The cool conditions in the opening practice session made it difficult for the team to assess the improvements made by the upgrade, said team principal Bruno Famin.

“They were struggling more with the tyre warming than evaluating the upgrade,” he said. “We know it’s not a major upgrade we have, it’s an improved part, mainly, the front wing here and developing the aero performance and reducing the weight as well.”

The team is pressing on with its upgrade plan and will have more new parts for its car at the Miami Grand Prix in two rounds’ time.

“We are pushing as much as we can in both factories,” said Famin. “In Viry, for the energy management, which is the only way where we can find performance by regulation. And in Enstone, of course, mainly on the aero and the tyre understanding developments. We are pushing hard for developing that car.”

Advert | Become a RaceFans supporter and go ad-free

2024 Japanese Grand Prix

Browse all 2024 Japanese Grand Prix articles

Author information

Keith Collantine
Lifelong motor sport fan Keith set up RaceFans in 2005 - when it was originally called F1 Fanatic. Having previously worked as a motoring...

Got a potential story, tip or enquiry? Find out more about RaceFans and contact us here.

One comment on “Pictures: Alpine’s new front wing and more Suzuka updates”

  1. Should have used the pink car to go with the cherry blossom. A wet race could be an opportunity to nab a good result.

Comments are closed.